Wichita Falls Drywall Repair
Drywall Patching and Hole Repair in Wichita Falls, TX
Drywall patching and hole repair in Wichita Falls with texture matching, mesh and paper tape methods, and free estimates on every job.
- 15+ Years local experience
- 500+ Projects completed
- Licensed & Insured
Serving Wichita Falls and nearby communities.
A doorknob dents the wall. A moving box scrapes a corner. Somebody backs a chair through drywall at a move-out inspection. It happens constantly around here, especially in rental housing near Sheppard AFB and MSU where tenants turn over every year or two.
Wichita Falls Drywall Repair patches holes from a nail-size ding up to a football-size blowout, then matches the texture so the wall looks untouched. Older Wichita Falls homes usually carry knockdown or orange peel finishes, not smooth drywall, and that's exactly where a store-bought patch kit tends to leave a visible flat spot.
What's included
What's Included with Drywall Patching and Hole Repair
Typically included Optional Customer prep
- Cutting the damaged area square and installing backing or a butterfly clip
- Taping the seam with mesh or paper tape depending on hole size
- Two to three coats of joint compound, sanded smooth between coats
- Texture match to blend with the surrounding wall
- Paint touch-up or full-wall repaint if the existing paint has faded around the patch
- Multiple patches on one visit at a reduced per-hole rate
- Clear furniture or wall hangings within a few feet of the damaged area
- Point out any other small dings while the crew is already on site
Want a clearer scope?
Get a Free EstimateHow it works
How Our Drywall Patching and Hole Repair Process Works
Step 1Assess the damage
Measure the hole, check for wiring or plumbing behind it.
Step 2Cut a clean opening
Square edges make for a tighter, stronger patch.
Step 3Install backing
A scrap of drywall or a repair clip gives the patch something to grab.
Step 4Tape and float the seam
Mesh tape for small holes, paper tape for anything larger.
Step 5Apply mud coats
Two to three thin coats beat one thick one every time.
Step 6Sand and texture match
Knockdown or orange peel sprayed to match the existing wall.
Cost
What Does a Drywall Patching and Hole Repair Cost in Wichita Falls?
Cost mostly comes down to hole size, how many patches are needed, and whether the texture is a quick match or a tricky blend. Get a free estimate and we'll give you a real number before any work starts.
| Project type | Typical range | What’s included |
|---|---|---|
| Small nail holes or dings | $125–$250 | spot patch and texture blend, one or two spots. |
| Doorknob-size holes | $200–$400 | cut-and-patch with backing, full texture match. |
| Larger holes (12"+) | $350–$650 | bigger backing piece, multiple mud coats, wider texture blend. |
| Multi-patch visits | $450–$900 | several holes across one or more rooms in a single trip. |
These are typical local ballparks — final cost depends on scope, materials, and site conditions. A free estimate gives you an accurate, itemized number for your home.
Want a number for your home?
Get a Free EstimateMaterials
Materials and Methods for Drywall Patching and Hole Repair
Self-adhesive mesh tape
Sticks right to the wall and holds small patches without extra backing, which speeds up the smaller jobs.
Paper joint tape
Stronger than mesh for wider seams, and it resists cracking better through North Texas summer-to-winter temperature swings.
Setting-type joint compound
Hardens chemically instead of just drying, so it's less likely to shrink or crack in a dry Wichita Falls summer.
All-purpose ready-mix compound
Used for the final finish coat since it sands smoother and blends easier under texture.
Hopper gun knockdown texture
Matches the dominant wall finish in most Wichita Falls homes built before the 1990s.
Orange peel texture spray
For the newer construction and remodeled rooms that use the finer orange peel finish instead of knockdown.
Questions on materials?
Get a Free EstimateTimeline
How Long Does a Drywall Patching and Hole Repair Take?
Most patch jobs wrap up in a single visit, though bigger holes need a little more drying time between coats.
- 01
Site visit and cut-out
same day - 02
Tape and first mud coat
same day - 03
Second and third mud coats
1–2 daysdry time between coats.
- 04
Texture match and cure
1 day - 05
Paint-ready
next day
Need a schedule that fits?
Get a Free EstimateCodes & permits
Permits and Codes for Drywall Patching and Hole Repair
Always confirm with the city or county before starting anything that touches framing or fire-rated walls.
| Typically needs a permit | Often no permit |
|---|---|
| Structural framing repair behind the drywall | Cosmetic patching of a hole or dent |
| Fire-rated wall assembly repair in a garage or shared wall | Texture matching after a patch |
| — | Single-panel spot repair |
Need help with permits?
Get a Free EstimateDIY vs pro
DIY vs Hiring a Pro for Drywall Patching and Hole Repair
| DIY | Hire a pro |
|---|---|
| Small nail holes and picture-hanger dings on a smooth wall | Holes over a few inches wide, or anything needing backing |
| Minor scuffs that just need spackle and a light sand | Knockdown or orange peel walls where a mismatched patch will stand out |
| Areas that will be covered by furniture or art anyway | Repeated damage in the same spot, which usually points to a bigger issue |
| — | Multiple patches across a rental turnover or move-out punch list |
Not sure DIY vs pro?
Get a Free EstimateWhen to call
When to Call for Drywall Patching and Hole Repair
Call or request a free estimate and we'll get it fixed before it becomes an eyesore.
- A hole bigger than a fist that a $10 kit won't cover
- Several dings scattered across one room or hallway
- A prior DIY patch that's visibly flat or the wrong texture
- Rental turnover repairs that need to look right before a new tenant moves in
Seeing warning signs?
Get a Free EstimateFAQs
Drywall Patching and Hole Repair FAQs
Can a handyman patch a drywall hole, or do I need a specialist?
A handyman can usually manage a small, smooth-wall patch. Once texture matching is involved, which covers most Wichita Falls homes, a specialist gets a cleaner result because blending knockdown or orange peel takes practice most handymen don't have.
How much does it cost to fix a drywall hole in Wichita Falls?
Small holes run $125 to $250. Larger holes with texture matching land between $350 and $650, depending on size and finish complexity.
Is it cheaper to patch drywall or replace the whole sheet?
Patching is almost always cheaper for isolated damage. Full sheet replacement only makes sense when a large section is compromised or water-damaged.
How long does it take for a small drywall patch to dry and get painted?
A small patch is usually paint-ready the next day after the final texture coat cures.
Can you match the existing texture so the patch doesn't show?
Yes. That's the difference between a patch that disappears and one that stands out under lighting. We sample the existing knockdown or orange peel pattern before spraying the match.
What's the difference between a DIY patch kit and a professional patch?
A kit covers the hole but rarely matches texture or blends the mud coat into the surrounding wall. A professional patch is close to invisible once painted.
More services
Other Drywall Repair services
Sheetrock Repair
Sheetrock repair in Wichita Falls covering panel replacement, seam repair, and texture matching, with free estimates and honest pricing.
Drywall Contractor Services
Drywall contractor services in Wichita Falls for multi-room repairs, rental turnovers, and punch lists, with free estimates on every scope.
Texture Matching (Knockdown & Orange Peel)
Knockdown and orange peel texture matching in Wichita Falls so drywall patches disappear into the wall, with free estimates on every job.
Ask about Drywall Patching and Hole Repair
Tell us about the project and how to reach you.